YOKOGAWA PX8000

12-1
IM PX8000-02EN
12.1 Zooming in on or out of Waveforms
This section explains the following settings for zooming in on or out of waveforms horizontally (time
scale). For details on vertical zoom settings, see sections 2.1 to 2.6 or section 8.1.
• Turning the zoom window display on and off
• Zoom position and zoom box
• Zoom display format
• Zoom 2 source window
• Main window’s display ratio
• Window layout
• Auto scrolling
• Zoom source waveform
• Changing the range for performing automated measurement of waveform parameters
• Zoom position using the zoom POSITION knob and magnification
► Features Guide: “Zooming in on Waveforms”
ZOOM Menu
1.
Press ZOOM to display the following menu.
• If you press
ZOOM while no zoom window is displayed on the screen, zoom box 1 is automatically
turned on (Z1 ON).
• Set the menu items separately for zoom windows Zoom 1 and Zoom2.
Select Zoom 1.
Turns the Zoom 1 window display on and off
Set the zoom position of Zoom 1.
Zoom box 1 that is displayed in the Main window moves to the specified zoom position.
The waveforms in zoom box 1 are displayed in the Zoom 1 window.
Set the zoom positions of Zoom1 and Zoom2.
Zoom box 1 and zoom box 2 that are displayed in the Main window moves to the
specified zoom positions. The waveforms in zoom box 1 are displayed in the Zoom 1
window; the waveforms in zoom box 2 are displayed in the Zoom 2 window.
Setting the Zoom 1 window
Set the display format (Main, 1, 2, 3, 4, 6, 8, 12, 16).
Moves zoom box 1 to the right edge of the screen (most recent data position)
Displays the second page of the menu
When both Zoom 1 and Zoom 2 window displays are on
Chapter 12 Zooming Waveforms