23-1
IM PX8000-02EN
23.1 Connecting the PX8000 to a Network
This section explains how to connect the PX8000 to a network.
Ethernet Interface Specifications
There is a 1000BASE-T port located on the side panel of the PX8000.
Item Specifications
Ports 1
Electrical and mechanical specifications IEEE802.3 compliant
Transmission system Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T)
Communication protocol TCP/IP
Supported services Server: FTP and VXI-11
Client: FTP (Net Drive), SNTP, DHCP, and DNS
Connector type RJ-45
Ethernet port
Items Required to Connect the PX8000 to a Network
Cable
Use one of the following types of network cable that conforms to the transfer speed of your network.
• A UTP (Unshielded Twisted-Pair) cable
• An STP (Shielded Twisted-Pair) cable
Chapter 23 Ethernet Communication