2-31
IM PX8000-02EN
2.8 Configuring the Horizontal Axis (Time axis)
This section explains how to set the time scale (the time per grid (1 div) displayed on the screen).
► Features Guide: “Horizontal Axis”
Configuring the Horizontal Axis (Time axis)
Turn the TIME/DIV knob to set the time scale.
TIME/DIV knob
Time Scale (TIME/DIV) Display
• If you turn the TIME/DIV knob when waveform acquisition is stopped, the time scale display shows
the time scale for the currently displayed waveform in the upper row and the changed time scale in
the lower row. The new time scale will be applied the next time waveform acquisition is started.
• If you do not operate the TIME/DIV knob for approximately 3 seconds, the time scale that you are
setting with the knob will disappear from the screen.
Top row:
Acquisition mode
Bottom row:
Time scale for the displayed waveform
Top row:
Time scale for the displayed waveform
Bottom row:
Time scale that you have specified
Turn the TIME/DIV knob.
Use the TIME/DIV knob to display the time scale
that is currently being set.
To Next Page
Loading...
Need help?
General
