7-3
IM PX8000-02EN
7.3 Setting Numeric Data Averaging
This section explains the following settings for exponential averaging (Exp) and moving averaging (Lin)
of numeric data.
• Averaging type
• Attenuation constant
• Averaging count
► Features Guide: “Averaging (Averaging)”
NUMERIC Menu
1.
Press
NUMERIC to display the following menu.
Set Numeric Measure to ON.
Displays the second page of the menu
2.
Press the Next 1/2 soft key to display the 2/2 menu.
Set the attenuation constant
(2-64).
Set the averaging type
(OFF, Exp, Lin).
When averaging type is Exp
Set the averaging count
(8-64).
When averaging type is Lin
To Next Page
Loading...
Need help?
General
