YOKOGAWA PX8000 User Manual

3-10
IM PX8000-02EN
3.10 Triggering on an Edge On A Trigger (Enhanced)
This section explains the following settings for triggering on an Edge On A trigger.
• Trigger source
• State condition
• State condition achievement condition
• Edge detection condition
• Trigger condition
► Features Guide: “Edge On A Trigger (Enhanced)”
ENHANCED Edge On A Trigger Menu
Press SIMPLE/ENHANCED and then the Setting soft key to select Enhanced. The following menu
appears.
Set Setting to Enhanced.
Set the trigger hold off. ► section 3.3
Set Type to Edge On A.
Set the state and trigger conditions.
Setting the State and Trigger Conditions (Set Pattern)
Press the Set Pattern soft key to display the following menu.
Set the state condition achievement conditions
(True, False).
Set the state condition (H, L, or X (do not use as a trigger source)).
Set the edge detection condition ( , , —).
Set the trigger level.
Set the hysteresis ( , , ).

YOKOGAWA PX8000 Specifications

General

Brand	YOKOGAWA
Model	PX8000
Category	Measuring Instruments
Language	English