10-1
IM PX8000-02EN
Chapter 10 Vector Display (Option)
10.1 Configuring the Vector Display
This section explains the following settings for displaying vectors. These settings are available on
models with the harmonic measurement (/G5) option.
• Vector display format
• Vector number
• Element and wiring unit
• Zooming vectors
• Turning the numeric data display on and off
► Features Guide: “Vector Display (Option)”
VECTOR SETTING Menu
Use the DISPLAY MODE and DISPLAY SETTING keys as explained in section 5.1 to display the
VECTOR SETTING menu.
Set the display format (1 (no windows), 2).
Set the element and wiring unit (Element 1-Element 4, ΣA, ΣB).
Set the vector number (1, 2).
Turns the numeric data display on and off
Set the magnification of vectors of the fundamental waves U(1) and I(1)
(0.100-100.000).
The value that indicates the size of the vector display’s peripheral circle changes
according to the zoom factor, and the size of the vectors that indicate U (1) and I (1)
change accordingly as well. If you press this soft key to select both U Mag and I Mag,
you can change both magnifications while maintaining the relationship between the two.
To Next Page
Loading...
Need help?
General
