YOKOGAWA PX8000

23-5
IM PX8000-02EN
23.4 Connecting to a Network Drive
This section explains the following settings for accessing a network drive through an Ethernet
connection to load or save various PX8000 data.
• FTP server (file server)
• Login name
• Password
• Turning FTP passive mode on and off
• Timeout
• Connecting to and disconnecting from network drives
► Features Guide: “Network Drive (Net Drive)”
UTILITY Network Menu
Press UTILITY an then the Network soft key to display the following menu.
Configure the network drive settings.
Configuring a Network Drive and Connecting to It (Net Drive)
Press the Net Drive soft key to display the following screen.
Settings used to connect to a network drive
Connects to the network drive
• Configure the FTP server settings (IP address; host name
and domain name can be set when DNS is enabled).
• Login name (up to 15 characters)
Disconnects from the network drive
• Password (up to 15 characters)
• Turns FTP passive mode on and off
• Set the timeout value (1-3600 s).