6-6
IM PX8000-02EN
Setting the Columns to Display (Column Settings)
Press the Column Settings soft key to display the following menu.
Set the number of columns (4, 6).
Set the column number (1-6).
Set the element and wiring unit (None, Element 1-Element 4, ΣA, ΣB).
Resets the element and wiring unit settings of each column
Resetting the Displayed Items (Reset Items)
Press the Reset Items soft key to display the following menu.
Resets the arrangement of the displayed items on all pages
The arrangement pattern varies depending on the number of installed elements.
Sets all displayed measurement functions to None*
Sets all measurement functions on all pages to None*
* The measurement functions displayed on the screen are cleared, and every numeric data is displayed
as no data.
Switching the Page
To set items on pages that are not currently shown, switch to these pages. For details on how to switch
pages, see section 6.1.
6.3 Changing the Displayed Items on the Matrix Display
To Next Page
Loading...
Need help?
General
