Zebra ZXP Series 3 - Magnetic Encoding Type

5: Replacement Procedures
Removal Sequence
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 103
5.3 Removal Sequence (continued)
PRINT ENGINE
5.5.32
Lid Sensor
page 159
5.5.33
Linkage
(Left Side)
page 160
5.5.27
Linkage
(Right Side)
page 149
5.5.34
Rocker (Left Side)
page 164
5.5.28
Rocker (Right Side)
page 150
5.5.30
Ribbon Take-Up
Motor
page 154
5.5.29
Printhead Lift
Motor
page 153
5.5.35
Stepper Motror
page 166
5.5.44
Drive Roller
Assembly
page 187
5.5.42
Platen Roller and
Exit Roller
page 183
5.5.38
Mag Encoder
Assembly
page 178
5.5.43
ATM Card Feed
Sensor
page 186
5.5.39
Mag Sensor
page 180
5.5.40
Card Sync Sensor
page 181
5.5.37
Pressure Rollers
(Front and Back)
page 174
5.5.36
Printhead Lift Cam
page 168