16 Zebra ZXP Series 3 Card Printer Service Manual P1061317-002
2: Installation and Setup
Unpacking the Printer
2.2 Unpacking the Printer
Your ZXP Series 3 Card Printer ships in a cardboard carton, protected by foam inserts and a
protective anti-static bag. Keep all packaging material in case you need to move or re-ship
the printer.
Step 1. Before opening and unpacking the printer, inspect the carton to ensure that no
damage occurred during shipment.
Step 2. Ensure that you have a clean and nearly dust free environment for proper operation
and storage of the printer.
Step 3. Unlatch and remove the handle, open the carton, and remove the box containing the
printer accessories from the shipping carton.
Step 4. Remove the foam packing material from the top of the printer.
Step 5. Lift the printer out of the carton by holding it on both sides of the bottom and lifting
the printer gently from the carton.
Step 6. Make sure the following accessories are included with your printer:
a. Software CD-ROM
b. Quick Start Guide
c. Power Cords (one or two depending on the configuration)
d. Power Supply
e. USB Printer Cable
If any items are missing, please contact your dealer. To reorder; refer to Appendix M of
this manual.
To Next Page
Loading...
