5: Replacement Procedures
Procedures
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 119
5.5.7 Lock
Step 1. Locate the Lock Assembly (circled below).
Step 2. With a 10 mm Socket Wrench, remove the nut, washer, and locking arm.
Caution • If you have the Lock Option installed, ensure that the Lock is UNLOCKED
before removing the Top Cover (Page 116).
NOTE • This procedure uses Spare Kit # P1031925-036: KIT, LOCK REPLACEMENT.
To Next Page
Loading...
