Zebra ZXP Series 3 Service Manual

C: Accessing a Network Printer via a Web Browser
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 209
Network Settings:
Network Settings
• Host Name Configure the Host Name of the printer. The name set here
is used with WINS and Utility, etc. The name must be
different from those of other network devices.
• DHCP/BOOTP Enable/Disable the function to get the IP address from the
DHCP/BOOTP server when the printer is turned on. To
get the IP address of this printer from the DHCP/BOOTP
server, the DHCP/BOOTP service must be turned on.
• IP Address Configure the IP address on this printer. The value must
be configured in the format of a four-part series of
numbers separated by decimal points, such as
xxx.xxx.xxx.xxx.
• Subnet Mask Configure the subnet mask on the printer. The value must
be configured in the format of a four-part series of
numbers separated by decimal points, such as
xxx.xxx.xxx.xxx.
• Default Gateway Configure the gateway IP address on this printer. The
value must be configured in the format of a four-part
series of numbers separated by decimal points, such as
xxx.xxx.xxx.xxx. The gateway must be in the network
where this printer exists.

Zebra ZXP Series 3 Specifications

General

Color	No
Card size	54 x 86 mm
Card types	Magnetic stripe (ISO 7811), PVC, PVC Composite, Smart card
Card feeder	Yes
Print technology	Dye-sublimation
Maximum resolution	300 DPI
Print speed (color)	180 card/h
Print speed (monochrome)	750 card/h
Printing media thickness	762 µm
Duplex print speed (color)	140 card/h
Display	LCD
Certification	FCC, CE, UL, CUL
Product color	Grey, White
Internal memory	32 MB
Built-in barcodes	EAN13, EAN8, Interleaved 2/5, PDF417, UPC-A
Total input capacity	100 sheets
Display number of characters	16
Compatible operating systems	Windows
Storage temperature (T-T)	-5 - 70 °C
Operating temperature (T-T)	15 - 30 °C
Storage relative humidity (H-H)	20 - 70 %
Operating relative humidity (H-H)	20 - 65 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Interface	USB
Optional connectivity	Ethernet, USB 2.0

Weight and Dimensions

Weight	5530 g
Dimensions (WxDxH)	201 x 368 x 309 mm