Parameters 255
51.29 DRIVE TYPE CODE
Shows the drive type code of the fieldbus adapter
module mapping file stored in the memory of the
drive.
- / UINT32
0...65535
Drive type code of fieldbus adapter module mapping
file.
1 = 1 / -
51.30 MAPPING FILE
VER
Shows the fieldbus adapter module mapping file
revision stored in the memory of the drive.
In hexadecimal format. Example: 0x107 =
revision 1.07.
- / UINT32
0...65535
Mapping file revision. 1 = 1 / -
51.31 D2FBA COMM STA
Shows the status of the fieldbus adapter module
communication.
IDLE /
UINT32
IDLE Adapter not configured. 0
EXEC. INIT Adapter initializing. 1
TIME OUT A timeout has occurred in the communication
between the adapter and the drive.
2
CONFIG ERROR Adapter configuration error – the major or minor
revision code of the common program revision in the
fieldbus adapter module is not the revision required
by the module (see par. 51.32 FBA COMM SW
VER), or mapping file upload has failed more than
three times.
3
OFF-LINE Adapter is off-line. 4
ON-LINE Adapter is on-line. 5
RESET Adapter is performing a hardware reset. 6
51.32 FBA COMM SW
VER
Shows the common program revision of the adapter
module.
In format axyz, where a = major revision number, xy
= minor revision numbers. z = correction letter.
Example: 190A = revision 1.90A.
- / UINT32
0x0000...0xFFFF Common program revision of the adapter module 1 = 1 / -
51.33 FBA APPL SW VER
Shows the application program revision of the
adapter module.
In format axyz, where: a = major revision number, xy
= minor revision numbers, z = correction letter.
Example: 190A = revision 1.90A.
- / UINT32
0x0000...0xFFFF Application program revision of the adapter module 1 = 1 / -
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
To Next Page
Loading...
