892 J006 MNAH | PGC5000 G EN 2 | 71
Figure 4-37: Valve Driver Configuration
⎯ Oven>DTC 1>Valve(#)>Config displays the valve information related to the valve driver with
the same number. For internal valves (see Figure 4-38), this screen provides the specific
information on the valve type and the configuration of the analyzer. The name of the valve,
which is used to identify the valve when creating an analysis, can be changed for reference.
The screens for external valves show only the name of the valve.
Figure 4-38: Valve Configuration
To Next Page
Loading...
