Accu-Chek Inform II User Manual

206
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Entering patient test results using the Other Test Entry
feature comprises the following steps:
■ Enter the patient ID.
1
■ Enter the date and time the test was performed.
■ Enter or confirm the test strip, kit and/or other
reagent lot numbers.
■ Enter the test strip, kit and/or other reagent expira-
tion date the first time a lot number is entered.
■ Enter the onboard control result(s) if available.
■ Enter the test result(s).
■ Select appropriate comments.
This can be done either manually or by using the
barcode scanner.
1. Note: The display of date of birth (DOB) is not available for
OTE workflows.
This can be done either manually or by using the
barcode scanner (if a barcode is available).

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing