Accu-Chek Inform II User Manual

Supplement for Other Test Entry • C
215
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Entering control test results using the Other Control Tests
menu comprises the following steps:
■ Select the type of control to be recorded.
■ Enter the date tested (if required).
■ Enter the time tested (if required).
■ Enter or confirm the kit or test strip lot number.
■ Enter the kit or test strip expiration date.
■ Enter or confirm the control lot number.
■ Enter the control lot expiration date.
■ Select the control result(s).
The control solution results must fall into the acceptable
range indicated on the test kit or reagent packaging, or
as defined by your institution, before being considered
successful.
This can be done either manually or by using the
barcode scanner (if a barcode is available).

Accu-Chek Inform II Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Memory Capacity	1000 test results
Display	LCD
Measurement Range	10 to 600 mg/dL
Connectivity	Infrared
Sample Type	Capillary whole blood
Operating Temperature	16 to 32°C (61 to 90°F)
Relative Humidity	10 to 90% non-condensing