Ag Leader Integra Display User Manual

109 Ag Leader PN 4002083 Rev. N
GPS
Info button
• Stream
• Format
• Format Details
• Navigation System
• Network
• Authentication
The information shown on this screen is
provided by the NTRIP Network.
RTK Settings - 900/400 MHz
Press: Home button > Setup (wrench) button > GPS button > Serial (from Receiver drop-down box) >
Receiver Setup (wrench) button > General tab > RTK (from Differential Correction drop-down box) >
Differential Source Setup (wrench) button
Channel Spacing
Use drop-down menu to select Channel
Spacing (Relay 400 Only)
Frequency
Press button to add a
Frequency (400 Only) or
Channel (900 only)
Select frequency or channel
and press button to delete
selected frequency or channel
Select frequency or channel
and press button to make
selected frequency or channel
active
Stream
Stream Info
Format:
Format Details:
Navigation System:
Network:
Authentication:
RTCM3_NEAR
RTCM 3
GPS & GLONASS
Iowa RTK Network
Required
Reciever: GPS 6500
Serial
General
Differential Source
RTK
Set
Active

Ag Leader Integra Display Specifications

General

Brand	Ag Leader
Model	Integra Display
Category	Monitor
Language	English