27 Ag Leader PN 4002083 Rev. N
S
ETUP
M
ANAGEMENT
S
ETUP
EVENTS
Events are used to track field operations. New events can be created at anytime and therefore a
physical field can be broken into many events or recorded under one.
An event contains all coverage maps created while that event was active. Events are automatically
named by date and time.
The display can be run in two different modes:
Traditional mode: requires user to specify a Grower, Farm, and Field for the Event. The display
associates this information with setup files and logged data. When these files are reviewed or utilized in
the future, it provides the operator with a greater depth of information.
Events Only mode: minimizes the setup process so that the display is ready to run in the field with the
least amount of setup (just a few button presses).
Setting mode (Traditional or Events Only) using Permissions
The display is set to Traditional mode by default but Events Only mode can be enabled by de-selecting
“Field Management” in a user’s permissions.
Management (Barn) button > User tab > Select Specific User > Setup (wrench) button
Edit User screen allows permissions to set for
user.
Display uses Traditional mode when Field Management is checked. Events using
the Traditional mode are tied to the Grower/Farm/Field structure.
Display uses Events Only mode when Field management is unchecked.
Edit User
General
Phone/Email
User Role
Operator
Manager
Address
Permission Level
Custom
Management
Field Management
View Summary
Mapping
Pan/Zoom Controls
Legend Toolbox
Marks Toolbox
Permissions
Management
Field Management
View Summary
Management
Field Management
View Summary
To Next Page
Loading...
Need help?
General
