32 Firmware Version 6.0
• Clear Bounds button
Press to center the map on the current GPS position.
Note: The Clear Bounds feature is particularly useful if you have flyer points or have logged a point outside
the mappable range of your current location.
Importing and Exporting Field Boundaries
Boundaries can be created with the display or imported from desktop GIS software. Any boundary files
present in the display can also be exported for use in desktop mapping software.
Note: For more information on creating boundaries, see “Create Boundary” on page 55.
• USB Import button
To import a boundary from the USB drive, first go
to the Setup Field tab, highlight the correct field in
the Farm/Field list and press the USB Import
button.
The File Selection screen appears. Highlight the
desired file to import.
Operator can import/export all fields and boundaries
at once with an .AGSETUP file. For more
information on .AGSETUP files see
See “.AGSETUP”
on page 353.
Press to complete the import process.
• USB Export button
To export a boundary to the USB drive, highlight the correct field in the Farm/Field list and
press the USB Export button. At the File Selection screen, highlight the desired field to export.
A screen will appear telling you that the boundary was exported successfully. Press return to the
field setup screen.
Grower/Farm/Field
Season Users
Contacts
Grower: Gene Eilers
Farm: Sheldon
Grower: Seth
Field: Low 80
True Area:
Boundary
Management Setup
Clear
40 ac
39.92 ac
Businesses
File Selection
Name
Boundaries
New Folder 1
Field_1.iby
Field_2.iby
Field_3.iby
Field_4.iby
irx_multi_product
irx_single_product
Field:
Farm:
Grower:
Demo
Allegon County
Michigan Test Fields
91.51 ac
To Next Page
Loading...
Need help?
General
