45 Ag Leader PN 4002083 Rev. N
S
ETUP
F
IELD
O
PERATIONS
SETUP EVENT
You must have already created the following:
• A
Season
,
Grower
,
Farm
and
Field
in Setup Management. For more information, see
“Management
button” on page 30.
• An
Operating Configuration
at the Setup screen’s Configuration Tab. This Operating Configuration
consists of Equipment, Vehicle, Implement, Controller (optional), Container (in Application), and Ground
Speed Source.
• A
Product
(if you are creating an Application or Planting Field Operation) at the Setup Product Tab. For
more information, see
“Product tab” on page 22
.
All of these are referenced by the Field Operation Wizard during the Field Operation setup process.
Press the “Select Event” button
and follow the steps in the wizard.
Select Event button opens the Field Operation Wizard where you can enter information relating to your
Growing Season, Grower, Farm, Field, Crop Type and Product. For more information, see
“Setup Event”
on page 45
and also “Field Operation Options” on page 46.
1. Grower, Farm and Field Selection
Enter a Growing Season, Grower, Farm, and Field by pressing to select existing ones from a drop-
down menu, or by pressing to create a new one.
Use to select an operating configuration from the drop-down menu. For more informations on
Configuration Selection see
“Configuration Selection” on page 25.
2. Product Selection
A planting or application configuration must include a product. Select product from the drop-down list or
press to create a new one.
Press to continue.
• If a configuration is loaded with undetected
modules, the Product Selection screen may show
some grayed out (unavailable) options. The
example to the left shows that the Direct
Command module is active but Direct Injection,
Crop Sensor, and Boom Control modules are
grayed out and not functional.
3. Region Options
Press
to edit or change the region name from the system default if desired. At this screen, you can
also create a new region or change the controlling product.
Product Selection
DC COM10K
DL1
Crop Sensor
Boom Control
Active
Active
Active
Select Product
Active
28% UAN
To Next Page
Loading...
Need help?
General
