Ag Leader Integra Display User Manual

309 Ag Leader PN 4002083 Rev. N
A PPLICATION
C
ONTAINER
S
EQUENCING
APPLICATION
CONTAINER SEQUENCING
Container Sequencing functionality allows application of the same product (discrete products or blends)
sequentially from multiple containers. When product container is low or empty, system automatically
advances product application to the next designated container in the sequence.
Note: Container Sequencing functionality is only supported in the Ag Leader Integra display beginning with
display firmware upgrade 6.0. Ag Leader Versa display does not support sequencing functionality.
CREATE A SPINNER SPREADER CONFIGURATION
If necessary, create a Spinner Spreader configuration. To create a Spinner Spreader configuration, continue
to
“Create Configuration” on page 293.
CONTAINER SEQUENCING CONFIGURATION
Once the display has been upgraded, complete the following steps to set up container sequencing.
1. Select Event/Load Configuration from Home screen.
2. Select Season, Grower, Farm, Field
Press to accept and continue.
Select Event
2014 Crop
Growing Season
Grower
Ag Leader
Farm
Te st
Field
Management Selection
Enable Management
Test 1
91.62 ac

Ag Leader Integra Display Specifications

General

Brand	Ag Leader
Model	Integra Display
Category	Monitor
Language	English