183 Ag Leader PN 4002083 Rev. N
P
LANTING
R
ATE
C
ONTROL
The Rate Control Settings screen appears.
• The top drop-down menu selects a specific variety for
rate control. This drop-down menu shows all of the
varieties that entered in Product Setup. For more
information, see
“Product tab” on page 22
.
• The
Rate 1
and
Rate 2
settings represent preset
application rates that allow operators to quickly change
between desired target rates for each individual product.
Press
to enter the desired amount.
• The
Increment
button allows operators to specify the
increase or decrease amounts for a specified rate when
using
/
on the Product Control Toolbox.
Press
to enter the desired increment.
• To load a map-based prescription file, press the
Prescription
button.
LOADING PRESCRIPTIONS
Press: Map button > Rate Setup button in the Product Control Toolbox > Load Prescription button
The Rate Control Settings screen appears.
1. Press the Load Prescription button.
2. The File Selection screen appears.
3. Highlight the correct .AGSETUP (prescription) or
.shp (shape) file and press .
4. Return to the Rate Control Settings screen, the
Prescription rate is now shown on the screen. The
Load Prescription button has disappeared and in its
place is the Remove Prescription button, which
resembles a minus sign. Press the Remove
Prescription button to remove the prescription from the
field.
SHOWING PRESCRIPTIONS ON THE MAP SCREEN
On the Map screen’s Mapping Toolbox, press the Legend Setup (wrench) tool and the Legend
Select screen appears. Notice that the Rx (prescription) button appears at this screen.
1222 (sds)
Rate 1:
Rate 2:
Increment:
Minimum Flow
33000
32000
1000
Rate Control Settings
Rx
0 sds/min
1222 (sds)
Rate 1:
Rate 2:
Increment:
Minimum Flow
33000
32000
1000
Rx
0 sds/min
1222 (sds)
Rate 1:
Rate 2:
Increment:
Minimum Flow
33000
32000
1000
Rx
0 sds/min
Rate Control
irx multi product
irx single product
Demo dry DAP 175default.i
Demo dry K 0default.irx
Demo dry N 100default.irx
Demo dry NH3 0 default.irx
No Preview
Name
File Selection
To Next Page
Loading...
Need help?
General
