Ag Leader Integra Display User Manual

23 Ag Leader PN 4002083 Rev. N
S ETUP
C
ONFIGURATION
Planting Settings
• Edit Info button
Press to edit the following information for the highlighted product in the Product List.
- Manufacturer
• Edit Legend button
Press to change the legend settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend
For more information, see “Legend Settings” on page 52 .
Application Settings
• Edit Info button
Press to edit the following information for the highlighted product in the Product List.
- Product Units
- Manufacturer
- EPA Number
- check box for restricted use pesticides
• Edit Legend button
Press to change the legend settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend
For more information, see “Legend Settings” on page 52 .
Grain Harvest Settings
• Crop Settings
Press the Edit button to open the Grain Settings screen where you can adjust the following settings:
- Dry% The percentage of grain moisture used to calculate Dry Bushels
- Weight to Volume The Weight to Volume conversion number used to calculate bushels.
- Expand bushels for all grains below dry% If the moisture of the harvested crop is below the dry
percentage, the display increases weight to show the weight which would be shown if the
crop equaled or exceeded the dry percentage.
• Legend Settings
Choose Yield or Moisture from drop down box.
Press Edit Legend to change the settings listed below.
- Average
- Range Spacing
- Color Scheme
- Ranges
- Reset to Default Legend

Ag Leader Integra Display Specifications

General

Brand	Ag Leader
Model	Integra Display
Category	Monitor
Language	English