194 Firmware Version 6.0
Down Force Inadequate
System hydraulic pressure is at maximum pressure
down force system does not achieve acceptable gauge wheel load
Recommendation: Planter does not weigh enough to handle the field
conditions.
Low Gauge Wheel Load
Down force system does not achieve acceptable gauge wheel load
User defined alarm to signal operator if planter is loosing planting
depth.
Hydraulic Pressure too low
Down force system commanding more down force but hydraulics are
not reacting
Check tractor remote is on
Check that enough hydraulic fluid is directed to down force system
Down Force
Down Force Inadequate
Down Force
Low Gauge Wheel Load
Down Force
Hydraulic Pressure Too Low
To Next Page
Loading...
Need help?
General
