302 Firmware Version 6.0
4. Select Region and Controlling Product
Select Region from drop-down menu or use press
keyboard button to name region.
Select Controlling Product for the Mix/Blend.
Press to complete the process of setting up
the dry blend or p
ress to return to Home screen
without setting up an event.
RUN CONFIGURATION
Once a configuration has been completed, the Map View button appears at the bottom of the
Home screen. Press the Map View button to see the Map screen. The map below is displayed
in Zoom to Extent view.
Below is an example of a Spinner Spreader Granular Product Control applying two products.
• (A) Mapping Toolbox
• (B) Product Control Toolbox
• (C) Conveyor Indicator
• (D) Spreader Control button
• (E) Spinner Automatic Control
• (F) AutoSwath
• (G) Master Switch Status (on)
AUTOMATIC SPINNER CONTROL
To turn Automatic Control functionality On/Off in the configuration setup see “Automatic Control” on
page 298
.
Turn Spinners on/off by pressing the Spinner Icon located in the Task Bar. After
pressing the Spinner Icon, a warning will appear alerting user the spinners will turn
on and to remain clear of equipment.
205 +
185 - 205
165 - 185
145 - 165
0 - 145
Rate
Flow:
Container:
272.4 lb/min
146 bu
1.91 ac
15.0 mph
200.00
150.00
lb/ac
1
200
2
175
DAP
150.00
200.00
Potash lb/ac
60 ft 0 in
Fan Frame
Feed Gate
3.5
2.0
25
25
700
1
DAP
RPM
To Next Page
Loading...
Need help?
General
