38 Firmware Version 6.0
Setup and USB buttons are locked for Operators if a Manager is present in the system. A
Manager can access setup menu and USB by pressing button and inputting their
password.
A User can be setup as an Operator and Manager to have the same access as a Manager.
The Home and Map screen will appear different depending on how you assigned user permissions. For
setting up users with permissions see
“Users tab” on page 33.
Basic Permissions - Home screen
• No Summary screen
• Setup and USB buttons are locked (as indicated by a padlock icon on those buttons)
• Brightness and volume are on home screen - settings saved per operator
• Operator Change - Option to continue or start new operation when operators change
Full Permissions - Home Screen
• Summary screen button is present
• Setup and USB are locked
• Management, GPS/Guidance, Console Setup, and External Storage Buttons are locked for
Operators.
• A manager can access these buttons by pressing the button and inputting their password.
A user, set only as an Operator, cannot select a different configuration, when a manager is setup in the
display. When a manager is setup in the display, only a managers can unlock and change the
configuration so the manager should make sure to select a configuration upon setup.
Map screen appearance of an operator
with Basic permission. Only the
Guidance toolbox is present.
Operator can
• Create guidance lines
- Straight AB
- SmartPath
• Nudge
• Guidance setup
0.67 ac
4.5 mph
Guidance
1
New
Pattern
Load
Pattern
Manage
Patterns
To Next Page
Loading...
Need help?
General
