1100 Series Nano Pump Service Manual 241
Control Module Screens for the Nano Pump 6
Settings -
Bottle Fillings
With the F4-key (Bottle Fillings) you can adjust the settings for the bottle fillings
to their current state. Select F8 (Refill) to refill All bottles or a Selected bottle
to total volume. By selecting the respective tick-boxes, you can also choose
whether and when to have Not-Ready or Error conditions. Changes must be
activated with F6 (Done).
Settings -
Runtimes
With the F5-key (Runtimes) you can change the stop time and the post-run
time for this module individually. Changes must be activated with F6 (Done).
Analysis -Status Press F5-key (Views) and select Status.
To Next Page
Loading...
