Agilent Technologies 1220 Infinity II LC User Manual

144 1220 Infinity II LC System User Manual
9 Test Functions and Calibration
1220 Infinity II LC System
Module Info
The Module Info tool collects diagnostic information from a module and writes
the results to a file. You can view the results in three tabs:
General
The General tab shows information about the module's firmware and options in
a two-column table.
Table s
The Tabl es tab allows you to display the contents of all available diagnostic
tables for the module. You click the [+] sign to open a table, or the [-] sign to
close an open table.
Signals
The Signals tab shows the plots of the available diagnostic signals from the
module. The signal plots that are available are module-dependent; where
available, both short-term and long-term plots are displayed for a signal.
Diagnostic Buffers
Each module contains a set of diagnostic buffers that can be queried.
Lab Advisor allows you to query all diagnostic buffers for a selected module
and write the results to a text file. The text file is written in English.
State Info
The State Info tool displays the current status of all Agilent 1220 Infinity II LC
modules; the status is continuously updated. Unless aborted, the tool runs
continuously for 60 min. Click Stop Test to stop the tool.

Agilent Technologies 1220 Infinity II LC Specifications

General

Brand	Agilent Technologies
Model	1220 Infinity II LC
Category	Laboratory Equipment
Language	English