1220 Infinity II LC System User Manual 51
Installation
3
Remove the Restriction Capillary
Remove the Restriction Capillary
When For column installation
Tools required p/n Description
8710-0510 Wrench open 1/4 — 5/16 inch
1
Open both front covers.
2
Unscrew the restriction capillary from the flow cell
capillary connection. .
3
Unscrew the restriction capillary from the connection of
the capillary coming from sampler or heater.
4
Remove the restriction capillary from the column
compartment.
To Next Page
Loading...
