1220 Infinity II LC System User Manual 231
Error Information
10
VWD Detector Error Messages
Grating or Filter Motor Errors
Error ID: Grating: 7800, 7801, 7802, 7803, 7804, 7805, 7806, 7808, 7809;
Filter: 7810, 7811, 7812, 7813, 7814, 7815, 7816
The motor test has failed.
During the motor tests, the detector moves the motor to the end position while
monitoring the end-position sensor. If the end position is not found, the error
message is generated.
Probable cause Suggested actions
1
Filter motor is not connected.
Please contact your Agilent service
representative.
2
Cable/connector defective.
Please contact your Agilent service
representative.
Test 0 F ailed : Filter motor.
Test 1 F ailed : Grating motor.
Probable cause Suggested actions
1
Motor is not connected.
Please contact your Agilent service
representative.
2
Defective motor.
Please contact your Agilent service
representative.
3
Defective/missing grating or filter.
Please contact your Agilent service
representative.
4
Cable/connector defective.
Please contact your Agilent service
representative.