Agilent Technologies 1220 Infinity II LC

1220 Infinity II LC System User Manual 303
Maintenance and Repair
11
Diode Array Detector (DAD)
Cleaning the Module
The module case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth allowing liquid to drip into the module.
WARNING
Liquid dripping into the electronic compartment of your module can cause shock
hazard and damage the module
➔ Do not use an excessively damp cloth during cleaning.
➔ Drain all solvent lines before opening any connections in the flow path.