1220 Infinity II LC System User Manual 195
Error Information
10
Diode Array Detector (DAD)
No heater current 232
Wavelength holmium check failed 233
Ignition Failed 233
Wavelength test failed 234
DAD Detector Error Messages 235
Visible Lamp Current 235
Visible Lamp Voltage 235
Diode Current Leakage 236
UV Ignition Failed 236
UV Heater Current 237
Calibration Values Invalid 238
Holmium Oxide Test Failed 238
Wavelength Recalibration Lost 239
DSP Not Running 239
No Run Data Available In Device 239
Instrument Logbook 240
This chapter provides information on the error messages that might be
displayed, and gives the possible causes and suggestions on their solutions.
To Next Page
Loading...
