Agilent Technologies 1220 Infinity II LC

1220 Infinity II LC System User Manual 305
Maintenance and Repair
11
Diode Array Detector (DAD)
3
Unscrew (do not remove) the four lamp screws (Pozidriv)
as required.
4 Remove the deuterium lamp and place it on a clean
place.
NOTE
Do not touch the glass bulb with your fingers. It may
reduce the light output.
5
Remove the Vis-lamp and place it on a clean place.
NOTE
Do not touch the glass bulb with your fingers. It may
reduce the light output.
6
Insert the deuterium lamp (RFID tag on the top side).