78 1220 Infinity II LC System User Manual
4
LAN Configuration
Automatic Configuration with BootP
3 Press Edit BootP Addresses… to edit the Tab File.
Figure 19 Edit BootP Adresses screen
4 In the Edit BootP Addresses... screen press Add... to create a new entry or
select an existing line from the table and press Modify... or Delete to change
the IP address, comment, subnet mask, for example, in the Tab File.
If you change the IP address, it will be necessary to power cycle the
instrument for the changes to take effect.
5 Leave Edit BootP Addresses... by pressing Close.
6 Exit BootP Settings by pressing OK.
Restarting the Agilent BootP Service
1 In the Windows control panel, select Administrative Tools > Services. The
Services screen appears, see Figure 18 on page 77.
2 Right-click Agilent BootP Service and select Start.
3 Close the Services and Administrative Tools screens.
To Next Page
Loading...
Need help?
General
