Understanding Your Agilent ChemStation 13
Agilent ChemStation Features
1
General Description
• ChemStation OpenLAB Option, product number G2189BA, Providing an
interface between ChemStation and Agilent Enterprise Content Manager
(ECM).
Up to four chromatography instruments may be configured on each
ChemStation. If instruments with spectroscopy detectors (diode array
detectors for liquid chromatography or capillary electrophoresis) are
configured, no more than two diode array detectors are supported on one
ChemStation, and the number of supported instruments is restricted to three.
When the ChemStation for LC/MS is used to control the Agilent 1100/1200
Series LC/MS module (optionally with one Agilent 1100/1200 Series LC or
1090 Series II LC), no other instruments are supported on the PC.
Data Evaluation-only Products
There are also two data evaluation-only products available that may not have
instruments configured. They are designed to be used for data evaluation in an
office environment:
• ChemStation for LC 3D data evaluation, product number G2190BA,
includes the data analysis capabilities of GC, LC, and CE ChemStation, and
diode-array spectral data evaluation.
• ChemStation for LC/MSD data evaluation, product number G2730BA,
includes diode-array spectral data evaluation, mass spectral data
evaluation, as well as the capabilities of the basic ChemStation for data
evaluation.
To Next Page
Loading...
