Agilent 8453 UV-visible Spectroscopy System Operator’s Manual 29
Introduction to Your System 1
General Purpose Agilent ChemStation Software for UV-visible Spectroscopy — Overview
Spectral
Processing
Your method defines how this data is analyzed. The first processing step is
spectral processing. The processed raw data spectra are transferred
automatically into a second container for processed spectra. This concept
allows you to have a look at the results of this processing step by viewing
the processed spectra container’s content. If you, for example, specified
first derivative data type, the first derivative spectra of all your raw data
are available in the processed spectra container after analysis. The type of
spectral operation is defined by your method settings.
Used Wavelength
A next step in the data analysis process is the access to data for further
evaluation specified in terms of wavelength and background correction
operations such as an internal reference calculation or three-point,
drop-line calculation.
This data is stored in the used wavelength container. In the Fixed
Wavelength task, for example, a tabular view on these data is available with
the Sample/Results Table window.
Results An additional step is the evaluation of the accessed data.
To Next Page
Loading...
Need help?
General
