50 Understanding Your Agilent ChemStation
2 Methods
Editing Methods
• Instrument Control depends on the configuration, and can comprise, for
example:
• oven parameters,
• injector parameters, and
• detector parameters.
• Data Analysis comprises:
• signal details,
• integration parameters,
• quantification parameters,
• calibration parameters,
• custom field setup parameters, and
• reporting parameters.
• Run Time Checklist comprises:
• the parts of the method that will be executed.
NOTE
Remember that methods can be stored in three locations in the ChemStation. Be sure that
you are editing the correct method.
To Next Page
Loading...
