Biochemical Analysis Software for Agilent ChemStation 25
Kinetics Mode 2
• The concentration of an inhibitor in the [I](mg/ml) field; this field is
present only if you have selected [S][I] in the Configure Substrate,
Inhibitors dialog box.
• The concentration of the first of two substrates in the [A](mg/ml) field; this
field is present only if you have selected [A][B] in the Configure Substrate,
Inhibitors dialog box.
• The concentration of the second of two substrates in the [B](mg/ml) field;
this field is present only if you have selected [A][B] in the Configure
Substrate, Inhibitors dialog box.
If a multicell transport sampling system has been configured, you can choose
Configure Substrate/Inhibitors from the Results window to display the
Configure Substrate, Inhibitors dialog box. It allows you to include
information on substrates and inhibitors with your results. You can also select
the Configure Substrate/Inhibitors dialog box by pushing the button in the
Edit Sample Information dialog box. The Configure Substrate, Inhibitors
dialog box contains the following parameters:
• None specifies that no substrates or inhibitors are included.
• [S] specifies that one substrate is included.
• [S][I] specifies that one substrate and one inhibitor are included.
• [A][B] specifies that two substrates are included.
Enter the units of concentration of the substrates and inhibitors in the Unit
field.
To load and evaluate old data, which have been generated by the HP 89532K software
choose Import from *.MKD… in the file menu.
To Next Page
Loading...
Need help?
General
