90 Agilent 8453 UV-visible Spectroscopy System Operator’s Manual
4 Using your Agilent 8453 UV-visible Spectroscopy System
Quantitative Analysis using a Calibration with Standards
5 Enter your standard’s information in the Standard Information dialog box
and click OK.
6 Your Agilent ChemStation software automatically calibrates and displays
the calibration results. After a successful calibration the task panel’s
calibration curve shows green. This indicates that your method is ready for
analysis.
NOTE
The Task panel’s Samples and Standards buttons can be used to switch your current view
to the samples or standards view.
At this point you can also save your method for future use. See “Saving Your Parameters as
a Method" on page 62 for more information.
To Next Page
Loading...
