Akai s2000 User Manual

PROGRAM EDIT
Page 108 S2000 Operator’s Manual - Version 1.30
NOTE: These are the pages you will see if you are creating a program based on the default
TEST PROGRAM. Because of Assignable Program Modulation (APM), however, these
assignments are not fixed and it is possible to assign virtually any controller to filter 2’s cutoff
frequency.As a result, please note that if you have loaded a sound made previously on an
S2800, S3000, S3200, S3000XL or S3200XL that has an IB304F installed, the modulation
assignments shown in these pages may differ from the ones shown above. For example,
instead of ENV3, you may see this:
This may be changed by moving the cursor to the controllerfield and selecting another
controller of your choice.

Akai s2000 Specifications

General

Type	Sampler
Polyphony	32 voices
Sampling Frequency	44.1kHz
Filters	Digital low-pass filter
MIDI	In, Out, Thru
Bit Depth	16-bit
Memory	2 MB, expandable to 32 MB
Outputs	8 individual outputs, stereo master output
LFO	1 LFO
Display	LCD
Storage	3.5" Floppy Disk
Inputs	Stereo input