SAVE
S2000 Operator’s Manual - Version 1.30 Page 41
SAVING ALL PROGRAMS ONLY
Sometimes, when you have been making many changes to programs (but not necessarily to
the samples associated with them), it is convenient to save all the programs in memory. This
can be done on the next page down:
As usual, press GO. You will be prompted:
If you are just ‘updating’ programs already saved to disk, use SAVE to overwrite the programs
but leave all samples, multis, effects files untouched.
SAVING ALL SAMPLES ONLY
When working intensively on sample editing, you will periodically want to save the samples.
This is done in the next page down:
As always, press F2 to initiate the save and respond accordingly to the WIPE/SAVE? prompt.
SAVING INDIVIDUAL ITEMS
You may also save an individual item. This may be a single program, sample, multi, effects file -
whatever. This is done on the next page down:
The name of the item to be saved is shown and you should press F1 and use the DATA wheel
to select the item you wish to save. In the top right hand corner you will see:
P This indicates that the item chosen is a program
S This indicates that the item chosen is a sample
M This indicates that the item chosen is a multi
X This indicates that the item chosen is an effects file
As usual, you should press F2 - GO - to initiate the save process and respond as appropriate to
the WIPE/SAVE? prompt you receive.
To Next Page
Loading...
