SAMPLE MODE
Page 138 S2000 Operator’s Manual - Version 1.30
NOTE: If there is some problem with the digital audio connection, you will receive this
message:
This indicates that the digital input is not connected or there is some problem with the cable or
the source of the audio (i.e. your CD player is not switched on!). If you see such a screen,
press F2 (EXIT) and attend to your connections.
If you are recording from a DAT machine at 48kHz, you will see this message:
The S2000 has difficulty recording at 48kHz and it is not recommended.
To Next Page
Loading...
