Mandatory IS-IS parameters missing
...................................................................................................................................................................................................................................
Alarm identifier DCNBUcLOST
Information The network element is isolated from the DCN because mandatory IS-IS
parameters are missing.
Alarm category Processing error
ASAP dcn
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The red fault LED is lit.
Cause Not all IS-IS parameters are correctly set for this mode.
Actions Provision the IS-IS parameters correctly.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-81
To Next Page
Loading...
