VC-3 Path trace identifier mismatch
...................................................................................................................................................................................................................................
Alarm identifier VC3cTIM
Information Mismatch between received trace ID and expected trace ID.
Alarm category Transmission
ASAP sdhLOPath
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The red fault LED is lit.
Cause A provisioned trace string inserted in a VC- 3 path was received corrupted or
not at all, due to wrong configuration, hardware failures or transmission
failures.
Actions Check cross-connections.
Check tributary cables and tributary interfaces of the unit.
Alarm messages
...................................................................................................................................................................................................................................
1-266
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007