P12s Moderate block error rate egress
...................................................................................................................................................................................................................................
Alarm identifier
P12SgcBDEG
Information P12s signal degrade protected (SDH -> PDH). The block error rate of an
incoming P12s signal exceeds an error threshold in a protected configuration.
Alarm category Transmission
ASAP pdhPath
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Cause Fault(s) in upstream external cabling or equipment.
Actions Check upstream external cabling and equipment.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-93
To Next Page
Loading...
