IS-IS Level-2 Area repair, transmission/configuration error
...................................................................................................................................................................................................................................
Alarm identifier DCNcREPAIR
Information IS-IS Level-2 Area repair, due to transmission or configuration error (invalid
state).
Alarm category Processing error
ASAP dcn
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Local indications –
Cause IS-IS Level-2 Area is not supported due to transmission or configuration errors.
Actions Check the transmission and configuration data.
If wrong, provision the correct IS-IS parameters.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-61
To Next Page
Loading...
