VC-12 Moderate block error rate
...................................................................................................................................................................................................................................
Alarm identifier VC12cDEG
Information VC-12 signal degrade. The block error rate of an incoming VC-12 signal
exceeds an error threshold.
Important:
In the Elcon NTU, the signal degrade threshold is fix preset to 10
–6
.
Alarm category Transmission
ASAP sdhLOPath
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Local indications –
Cause Fault(s) in upstream external cabling or equipment.
Actions Check upstream external cabling and equipment.
Alarm messages
...................................................................................................................................................................................................................................
1-226
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007
To Next Page
Loading...
