SDSL unit not present
...................................................................................................................................................................................................................................
Alarm identifier
SDSLcUNI
Information SDSL unit not present
Alarm category Equipment
ASAP sdsl
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The red “Fault” LED is lit
Cause Although the 1643 AM/ 1643 AMS is provisioned to be equipped with an
SHDSL option board, no SHDSL option board is present.
Actions Install an SHDSL option board, or change the provisioning.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-133
To Next Page
Loading...
