VC-4 Payload mismatch
...................................................................................................................................................................................................................................
Alarm identifier VC4cPLM
Information The received payload value, used to indicate the composition of the VC-4
payload, does not match the provisioned value.
Alarm category Transmission
ASAP sdhHOPath
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications In the reporting Network Element:
• In the upstream direction, “VC-4 Remote Defect Indicator” is activated.
• In the downstream direction, the alarm indication signal is inserted into the
next function.
Cause Payload composition of VC-4 at the network element that reported the alarm is
not the same as the payload composition of VC-4 at its far-end station.
Actions If the received payload label is >=1, check if the mapping mode of the local
and far-end network elements is the same.
Alarm messages
...................................................................................................................................................................................................................................
1-296
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007
To Next Page
Loading...
