VC-4 Remote defect indicator
...................................................................................................................................................................................................................................
Alarm identifier VC4cRDI
Information A Remote Defect Indication (RDI) is being received.
Alarm category Transmission
ASAP sdhHOPath
Alarm severity
(default setting)
Information
Reporting state
(default setting)
Not Reported
Local indications –
Cause The downstream far end station of the network element that reported the alarm
detects a malfunction at its receive side: VC-4 Excessive error rate, VC-4 Path
signal label mismatch, or AU-4 Alarm indication signal received.
Actions No alarms in the reporting network element. React on the far-end alarms.
Follow the clearing actions for those alarm(s).
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-297
To Next Page
Loading...
